Advanced Labeling

Description:
Oneshot Stencil Applicators

Our patented Diagraph Oneshot stencil applicator system offers you a flexible, portable and convenient means of stenciling on both porous and nonporous surfaces.

* Easy stenciling for rough and smooth surfaces.
* Convenient for remote job sites.
* No-mess, durable ink cartridge is fully disposable.
* Meets U.S. Government ink specifications.
* Available in seven high-visibility, CONEG certified and SARA compliant inks.
* Replaceable neoprene roller and plastic cover in two convenient sizes.
* Natural bristle brush.

Oneshot Roller & Brush Assemblies
The Oneshot roller or brush twists onto a specially designed ink cartridge–creating an easy-to-use stenciling tool. The ink saturation is controlled by a valve-action pump in the assemblies. The Roller Assembly features a durable neoprene roller and the Brush Assembly uses 100% natural bristles set in epoxy to assure long-lasting performance. There’s no messy refill, simply attach a new cartridge when you run out of ink.



Oneshot Ink Cartridges
Choose from seven high-visibility colors–for porous and non-porous surfaces. All Oneshot stencil inks are CONEG Stencil rollers certified and SARA compliant. Minimum order is eight cartridges–about one liter of ink.



Ink Conditioner For Stencil Rollers and Pads
Extends stencil roller and ink pad life by preventing them from drying out. Adds ink mileage by maintaining the proper ink consistency.
Use with all stencil rollers and pads.
View Details

Description:
These opaque aerosol inks are great for stenciling or color coding. Quik-Spray inks dry in just 30 to 60
seconds.
* All ink formulations comply with CONEG legislation.
* Environmentally safe, non-fluorocarbon propellant.
* New VOC compliant formula. Contains no CFCs
* Available in six high-visibility colors.
* 11.5 ounces (326 g) net weight.


Blockout Inks
Cover-up unwanted marks on cartons so they can be reused.
* Blockout ink dries quickly and is oil- and water-resistant.
* Use on porous or non-porous surfaces.
* 11.5 ounces (326 g) net weight aerosol cans (shown).
* Also available in one- or five-gallon (3.79 L or 18.93 L) pails for large-volume usage.
* New VOC compliant formula. Contains no CFCs

Silicone Lubricant
* Food Grade (Allow solvent to evaporate before incidental food contact)
* Lubricate doors, wheels and other moving parts
* Clean and shine metal surfaces
* Use on molds and finishing tables to prevent sticking
* Includes directional tube (as shown below) for hard-to-reach areas
* Non-fluorocarbon propellant, no CFCs or ODCs
* 13 ounces (368.55g) net weight.

Ink Cleaner
A general -purpose ink remover in a 12 oz net wt. Aerosol can. Very effective on coder wheels, rubber type, stencil rollers and brushes.
View Details

Description:
Rol-It-On® System Stencil Applicators For All Surfaces
Rol-It-On® system stencil applicators for all surfaces. Our most economical stencil applicators system for marking on both porous and non-porous surfaces. Use the refillable Rol-It-On ink pad to ink the roller prior to stenciling.
* For porous surfaces use a latex roller and R ink or use a Type N Roller with SK-1 ink
* For non-porous surfaces order a neoprene Type N roller and S or GS ink.
* Use the GS Kit to meet U.S. Government specifications when stenciling on porous or non-porous surfaces.

Rol-It-On Kit
* 3" (76.2 mm) roller assembly (latex or neoprene) with roller cover
* 3" (76.2 mm) Rol-It-On ink pad
* One quart (.9475 L) of R, S or GS black ink

HV System Stencil Applicators For Porous & Non-Porous Surfaces, HV system for non-porous surfaces
* For non-porous and difficult-to-mark surfaces such as plastic, vinyl, glass and metal.
* Refillable, four-ounce (118.3 ml) handle. Designed for heavier pigmented inks.
*Use with S and GS type inks. Rol-Flo® System For Porous Surfaces


Rol-Flo Systems Stencil Applicators For Porous Surfaces
* Provides economical and fast non-stop marking.
* Refillable, four-ounce (118.3 ml) plastic handle holds enough ink to mark up to 5,000 three-line address impressions.
* Use with R type ink.

Rol-Flo Kit
* 3" (76.2 mm) latex roller assembly with roller cover
* One quart (.9475 L) of R black ink Oneshot® Kit
* 3" (76.2 mm) roller assembly with roller cover
* Eight GS black ink cartridges

MODEL M STENCIL BRUSH
This refillable stenciling brush is perfect for rough, porous surfaces. Bristles are set in epoxy for long-lasting performance with solvent-based inks. Easy-to-use side button releases ink. 7-1/2" (190.5 mm). Use with Insta-Dry, GS-1 Black Ink and SK-1. For more info on stencil ink click here.

Model M Replacement Brush Tips
These replacement brush tips allow you to change worn-out brush-heads without replacing the Model M body.
View Details

Description:
We have the Stencil ink type and color to match your application, your stenciling inks system and any specifications you may need to meet. Our stenciling inks meet CONEG and SARA standards and GS Series inks are formulated to meet U.S. Government Specifications *CID A-A-208B Type IV.
View Details

Description:
Meets lowest VOC Requeirements Fast Dry for Porous/Non-Porous applications
* Ideal for all non-porous and porous materials such as: metal, wood, plastic, glass, concrete, cardboard, rubber. Dry time of about 120 seconds and withstands temps of 600 degrees.
View Details

Description:
Stencil Board and Stencil Oil Boards From Diagraph for letters 1/4" and larger
Diagraph Stencil Board is processed with a special formula of double boiled linseed oil. Each of our stencil oil boards is cured in our own plant and the oil board is cut with-the-grain for extra rigidity. Stencil Oil Boards from Diagraph lubricate with each cut, extending the life of your stencil machine. Our stencil boards also resists ink absorption so the same stencil board can be used many times.
View Details

Description:
A very durable synthetic material that is semi-translucent but is soft enough to cut by hand or on a stencil machine.
View Details

View Details